Flail mower Grino- rear and front middle class Samasz

Flail mower Grino- rear and front middle class Samasz

Grino can be aggregated typically with tractors on a tractor’s 3-point linkage of Cat. I or II (Cat. II / Cat. II). Flail shaft is powered by tractor’s PTO shaft, while the shift by tractor’s hydraulics. Mower can be mounted both at tractor’s rear and front, which improves general comfort of operation. Mower is additionally equipped with transverse shift option to provide easier passing of obstacles and adjusting the most comfortable turning.


1. Mowing shrubs and bushes, shredding branches of max. diameter of 5 cm
2. Cutting weeds and grass on uncultivated areas, treatment of sterile pastures and operation on green areas (orchards, vineyards)


1. Drive transmission by belt gear functions as overload clutch

2. In order to prepare mower for operation at tractor’s front, re-mount upper holder at mower’s opposite side and re-install it at PTO shaft’s opposite side. If tractor features left-hand rears, these can be user-changed by dismounting central gear and turning it around by 180°

3. Mower is hydraulically adjustable in relation to either tractor’s left or right side. Features standard-mounted hydraulic cylinder

4. New stronger housing has been designed to provide effective protection of bearings against dirt, while extending mower’s lifespan

1. Properly adjusted flail’s weight (0.7kg) and precise mounting and arrangement of bolts on shaft provide mower’s effective operation in difficult conditions
2. Large diameter of flail shaft (ϕ 168 mm) improves its stiffness and peripheral speed of knives
3. Mounting on 3-point linkage at tractor’s front or rear
4. Simple replacement of flail knives
5. Silent operation of flail shaft

6. Perfect fitting to ground and optimal mowing height
7. Top-quality metal sheet guards at mower’s front and rubber guard at mower’s rear provide effective protection against thrown out stones
8. Standard-delivered PTO shaft
9. Adjustment of mowing height within range of 3 and 8 cm with use of ground following bar
10. Strengthened enclosure and enhanced bearings of flail shaft
11. Easily replaceable skids made of durable steel
12. Additional internal and side strengthening of enclosure made of hard and durable steel
13. Standard-delivered overrunning clutch in intersecting axis gear
14. Innovative solution for protection of bearings and their lubrication
15. Cross traverse by 50 cm possible

Flail Mowers - Mulchers are designed for works related to maintenance of municipal infrastructure, urban greenery and orchards. Machines of this type are used for mowing grass, shrubs, bushes (up  to 10 cm) and cutting weeds on uncultivated areas  to leave windrows. Particularly useful in mowing road shoulders, ditches, as well as slopes and counter-slopes. Mulchers are designed for mowing grass, shredding it into pieces and then spreading the material all over the mowed area. This enables  obtaining a natural windrow, mineralisation of floral remains and re-introducing them to the soil.

Technical data

Type GRINO 160 GRINO 180 GRINO 200 GRINO 220
Working width [m / ft] 1,60 / 5’3” 1,80 / 5’11” 2,00 / 6’7” 2,20 / 7’2”
Working capacity [acres/h] ~ 3,70 ~ 4,00 ~ 4,50 ~ 5,00
Power demand [HP] from 50 from 60 from 70 from 80
RPM 540 / 1000
Necessary hydraulic couplers 1x double acting
Flail shaft diameter [mm/ in] ϕ 168 / 6 3/5”
V-belts quantity 4
Number of knives [pcs.] 24 24 30 36
Number of replaceable counter-knives [row] 1
Hydraulic side-shift length [mm / ft] 500 / 1’8”
3-point hitch cat. I / II
Weight [kg / lbs] 580 / 1280 610 / 1345 640 / 1410 665 / 1470
Max. diameter of branches to be cut [mm /in] 50 / 2”

· We are a stable company in the business since 1995,
· We provide professional advice,
· We employ experienced staff,
· We have permanent access to spare parts,
· We deliver machinery throughout the world.
You're not sure which product is best for you? Contact us - our experts will be happy to help you.
tel. +48 75 724 44 04
tel. +48 75 724 44 03
mob. +48 603 107 123
fax  +48 75 724 43 33
Siekierczyn 267
59-818 Siekierczyn
woj. dolnośląskie, Polska
NIP: PL 613-154-74-46
KRS: 0000321305
Zamieszczone w serwisie dane o asortymencie i cenach mają charakter informacji handlowej, nie stanowią oferty w rozumieniu Art.66 § 1 Kodeksu Cywilnego oraz nie stanowią odzwierciedlenia aktualnych stanów magazynowych. Wszystkie fotografie, rysunki techniczne i opisy produktów dostępnych w serwisie jak również znaki towarowe i nazwy firm zostały użyte w celu informacyjnym i są własnością uprawnionych podmiotów. Firma Jaskot Sp.j. posiada pełne prawo do publikacji zdjęć oraz opisów produktów jak również znaków towarowych i firm, w celu prezentacji asortymentu.