Bale wrapper PRONAR Z245
The product presented below is an information - it is not an offer within the meaning of the law.
Bale wrapper PRONAR Z245 due to the hydraulic transfer distributor, the machine is easy to operate.
Self loading and unloading system shortens the time of the next wrapping cycle. The hydraulic cutting system enables the process of wrapping without leaving the tractor cab. With bale wrapper PRONAR Z245 the process of wrapping is less time consuming and requires the involvement of less equipment and people. Loading arm allows loading a bale on the wrapping table without stopping. Turntable allows unloading a bale in two ways: on their side or front surface and then easily load it onto the trailer.The control system consists of a controller mounted on the bale wrapper and control console connected with wires to the machine and sensor system. This system controls the operation of each machine systems such as wrapping table position, the position of unloading table and the film.
Additional equipment:
– Multifuncional wrap counter L-02,
– Rotary transportation hitch with towing eye 50 mm,
– Fixed transportation hitch with towing eye 40 mm,
– Spare wheel (separatelly) 340/55-16.
Technical data:
Weight (kg) | 2070 |
Lenght in transport/working position (mm) | 4876/5560 |
Width in transport/working position (mm) | 2494/3790. |
Maximum height (mm) | 2665 |
Width (mm) | 1200, 1500 |
Bale diameter (mm) | up to 1800 |
Permissiable bale weight (kg) | 1100 |
Width of the wrapping foil (mm) | 500 or 750 |
Power requirement (HP/kW) | 35,3/48 |
Required tractor hydraullic outputs (pcs.) | (no.) 2 ( 1 pair) |
Suspension | single axle, rigid |
Tyres | 340/55-16 |
Maximum (km/h) | 30 |