KDF front disc mowers
Product code:
The product presented below is an information - it is not an offer within the meaning of the law.
Product information
Advantages and equipment of KDF mowers:
- Tractor’s triangle in standard equipment
- PTO shaft with overrunning and friction clutch in standard equipment
- Mechanical lock for transport
- “Floating cut” – modern, extended suspension frame and springs with high pitch enable better ground following (+250 mm, – 150 mm) and regulation of proper pressure on the ground
- Hydraulic cylinders in standard equipment – facilitate manouvering and transport
- Working width indicator in standard equipment
- Safety guard of PTO shaft secures against dirt and fast wear of the shaft
- Flow dividors enable even lowering and lifting of cutting unit by means of only one hydraulic connector
- Swath width regulated by swath guides
- Quick change of rpm direction
- Effective lightening (spring or hydraulic)
- Good visibility during operation and transport
Technical data:
| Type | KDF 260 | KDF 300 | KDF 301 W | KDF 340 | KDF 390 Fortschritt |
| Working width [m / ft] | 2,60 / 8’7” | 3,00 / 9’10” | 3,00 / 9’10” | 3,40 / 11’2” | 3,90 / 12’10” |
| Swath width [m / ft] | ~ 0,90 – 1,10 / ~ 2’11” – 3’7” | ~ 1,30 – 1,50 / ~ 4’4” – 4’11” | ~ 1,40 – 1,70 / ~ 4’7” – 5’7” | ~ 1,80 /5’11” | ~ 1,60 – 2,30 / ~ 5’3” – 7’7” |
| Necessary hydraulic couplers | 1 x single acting | ||||
| Number of discs [pcs.] | 6 | 7 | 7 | 8 | 9 |
| Number of knives [pcs.] | 12 | 14 | 14 | 16 | 18 |
| RPM | 1000 | 1000 | 1000 | 1000 | 1000 |
| 3-point hitch cat. | II | ||||
| Power demand [HP] | from 70 | from 80 | from 100 | from 90 | from 82 |
| Working capacity [acres/h] | ~ 7,00 | ~ 8,70 | ~ 8,70 | ~ 10,00 | ~ 7,50 |
| Weight [kg / lbs] | 805 / 1775 | 940 / 2075 | 1215 / 2680 | 1020 / 2250 | 820 / 1810 |
| Type | KDF 300 S | KDF 300 SL | KDF 340 S | KDF 340 SL | KDF 341 W |
| Working width [m / ft] | 3,00 / 9’10” | 3,00 / 9’10” | 3,40 / 11’2” | 3,40 / 11’2” | 3,40 / 11’2” |
| Swath width [m / ft] | ~ 1,40 – 1,70 / ~ 4’7” – 5’7” | ~ 1,40 – 1,70 / ~ 4’7” – 5’7” | ~ 1,40 – 1,80 / ~ 4’7” – 5’11” | ~ 1,40 – 1,80 / ~ 4’7” – 5’11” | ~ 1,40 – 1,80 / ~ 4’7” – 5’11” |
| Necessary hydraulic couplers | 1 x single acting | ||||
| Number of discs [pcs.] | 7 | 7 | 8 | 8 | 8 |
| Number of knives [pcs.] | 14 | 14 | 16 | 16 | 16 |
| RPM | 1000 | 1000 | 1000 | 1000 | 1000 |
| 3-point hitch cat. | II | ||||
| Power demand [HP] | from 100 | from 100 | from 110 | from 110 | from 110 |
| Working capacity [acres/h] | ~ 8,70 | ~ 8,70 | ~ 10,00 | ~ 10,00 | ~ 10,00 |
| Weight [kg / lbs] | 1205 / 2655 | 1180 / 2600 | 1140 / 2515 | 1140 / 2515 | 1140 / 2515 |
